Jeanneau Sun Odyssey 349

Details

• Make: Jeanneau
• Model: Sun Odyssey 349
• Engine Make: Yanmar 3YM20
• Horsepower: 21
• Fuel Type: Diesel
• Price: £120,000
• Location: In Hamble
• Keel: Swing
• Hull Construction: Fibreglass (GRP)
• Drive Type: Shaft

Dimensions

• Beam: 3.4m
• Draft: 1.4m
• LOA: 10.34m
• Displacement: 5340kg
• Fuel Tank Capacity: 130l
• Water Tank Capacity: 206l
• Hull Type: Monohull

Summary

This lovely 2022 Jeanneau Sun Odyssey 349 Limited Edition is ready to go and is equipped with the Premier trim pack, the Performance pack, and the Offshore electronics pack, equipped with the lifting keel offer a draft between 1.4m and 2.5m is perfect for the local cruising grounds allowing you to explore shallow coves and anchorages, this is the two cabin version offering 6 berths and has many upgrades fitted by the owner.

Mechanical

Yanmar 3YM20
21HP
Shaft drive
Hours - 295
3 bladed folding propellor
Bow thruster - Sidepower
25l water heater 220v with heat exchanger

Electrical

3 x 12v lithium batteries
220v shorepower
Battery charger
Solar panel

Rigging

Selden rigging
Dyneema mainsail and genoa halyards
Genoa lead rings adjustable from the cockpit
Spinnaker fittings
Slab reefing main with stackpack
Furling headsail
Lines led aft
Rigid vang
Mast steps

Sails
Mainsail
Genoa
Crusader Super Zero +

Navigation

Chartplotter - Raymarine Axiom 7
Autopilot - Raymarine p70
Speed/Depth/Wind - Raymarine i70
2 x Compass
AIS with on off switch
DCS/VHF - Raymarine Ray 6

Deck

Twin composite wheel steering with suede wheel covers
GRP deck with teak cockpit seating
Anchor with chain and warp
Electric anchor windlass - Quick 1000w
Mid ships cleats
2 x Harken ST Primary winches
2 x Harken ST coachroof winches
Aft fold-down swim platform with telescopic ladder
Outboard engine bracket
lifeline gates at rear
Removable teak cockpit table and pedestal, with system for stowing under helm, above liferaft
VHF Cockpit Speaker
Garage wall organiser including beach leg brackets
Warps and Fenders

Safety

Electric and Manual Bilge pumps
Jackstays

Canvas

Sprayhood with grab handles
Wheel covers
Stackpack
G-Nautic Rope/ Stowbags and cup holders in cockpit
Cockpit cushions

Miscellaneous

Beaching legs
3D dingy, with Padeyes points to attach to transom

Accommodation

6 berths in 2 cabins plus saloon
1 x heads and shower with 80l holding tank
Hot and cold pressurised water system plus additional footpump
Warm air cabin heating
12v usb plugs in the cabins
Shades for hatches and ports and screens for hatches
Fine Teak interior fit-out with solid wood cappings.
Light Oak laminate floorboards
Memory Foam Mattress toppers
Fore and Atf berth upholstered mattresses

Forward Cabin:
Central double berth with storage under, deep cabinet with shelving and hanging compartment. Wood shelving to hull sides with LED strip lighting & reading light. Wide double door to the saloon.

Galley to starboard:
L-shaped galley with laminated slate-style countertops, chrome plumbing fittings, and storage cabinets. Stainless steel sink (hot and cold water supply), 100 litre fridge, and gas cooker with two burners, grill, and oven. Galley wall organisation (shelf, cutting board and knife holder)
Replaced bin for improved 3 part pull out system with shelves above

Navigation Station to port:
Full-featured electrical panel with spare breakers, voltmeter, and 12V plug. Chart light. The whole table lid hinges up to stow out of the way.

Heads compartment to port:
Large compartment with sink, clothes hook, mirror, and cabinet above the sink. Wet locker with hanging bar. Marine toilet with holding tank. Shower with electric pump out. Access to cockpit locker

Aft Cabins to starboard:
Large double berth, deep cabinet with shelving and hanging rail, reading light and LED ceiling lights, hull shelf. Shades and screens for hatches and ports.

Construction

Lifting keel with hydraulic ram
Twin rudder
LOA: 33 ft 9 in / 10.34m
LWL: 30 ft 8 in / 9.40m~
Beam: 11 ft 2 in / 3.44m
Draft: 4 ft 1in - 8 ft 3 in / 1.26m - 2.54m
Swing keel weight: 1532kg

Documentation

Builders certificate
Declaration of Conformity
Purchase invoice - zero VAT
SSR - Guernsey

Disclaimer

For a full, detailed specification with additional photographs and direct contact details for the listing office visit our website

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Unless otherwise stated on the specification sheet the following presumptions are made
- Sail drive and shaft seals are more than 5 years of age
- Fuel and gas hoses and regulators are over 5 years old
- Standing rigging and sails are more than 10 years old

NOTE - Please ring our offices prior to visiting, as the boat may be unavailable for viewing or located at a different marina.

Contact

boatpoint at Deacons Marina

hamble@boatpoint.co.uk