Skip to main content
1 of 14

Hunter Channel 27

£23,500
  • Located at Conwy Marina
Contact Broker Value my boat Finance this boat
Year: 1999
LOA: 7.8m
Berths: 6
Draft: 1m

Details

  • Make: Hunter
  • Model: Channel 27
  • Engine Make & Model: Yanmar 1GM
  • Horsepower: 10
  • Fuel Type: Diesel
  • Price: £23,500
  • Location: In Conwy Marina
  • Keel: Bilge Keel
  • Hull Construction: Fibreglass (GRP)
  • Drive Type: Shaft

Dimensions

  • Beam: 2.8m
  • Draft: 1m
  • LOA: 7.8m
  • Displacement: 2590kg
  • Fuel Tank Capacity: 25l
  • Water Tank Capacity: 100 Litresl
  • Builder: Hunter Boats Limited
  • Hull Type: Monohull

Summary

Hunter Channel 27 notorious for their high quality build, excellent accommodation layout and ease of handling through self tacking jib and all lines leading back to the cockpit. Bilge keel this boat is perfect for exploring the local coastal waters, coves and bays and can take to the ground if needed only drawing 1m. Meticulously cared for this two owner boat is well equipped and will make a great cruiser for the start of the season. Antifouled 2024 and engine serviced 2024.

Mechanical

Yanmar 1GM 10HP engine

Diesel inboard

Shaft driven

Martec freshwater cooling system

Single cylinder

2 Blade prop with Stripper rope cutter

Recent Maintenance:

Engine serviced - 2024

New stern gland - Oct 2024

New cutlass bearing - Oct 2024

Antifouled and anodes replaced - 2024

Electrical

2X batteries (1X engine/ 1X domestic)

240V Shore power with galvanic isolator

Battery charger

Rutland wind generator

Hot water system heated by 240V power supply or by the engine cooling system

Mikuni thermostatic forced air diesel heating (vents in main cabin, aft cabin and heads)

Thermostatic 240V convertor heater in main cabin

240v convector heater in aft cabin

Rigging

Fractional stainless steel rigging

Alloy Z spar

Slab mainsail reefing (2001) with easy jacks and cover

Jib furling (2001)

2X Lewmar winches

High grade spinlock jammers on all lines

Sail Wardrobe:

Main sail

Furling head sail

Scooper

Navigation

Navigational lights

Suunto compass

NASA Clipper speed/log +depth duo

Garmin GPS

NASA Wind

ICOM VHF radio

Autohelm tiller pilot

NASA Navtex pro

Radar reflector

Interfaced autohelm and GPS

Deck

Fenders and warps

Plough anchor with chain and warp

Stainless steel boarding ladder

Stainless steel guard wire

Auxiliary engine bracket (wooden)

Cockpit shower (Hot and cold)

Safety

Life raft - Expires 2026

Canvas

Spray hood (Blue)

Miscellaneous

Quicksilver dinghy

Accommodation

The Hunter Channel 27 offers six berths across two cabins with 2X doubles and 2X singles.

Forward open V berth

Good sized saloon with U Shaped seating (blue upholstery scheme) surrounding a double leaved teak cockpit table. The saloon area can also provide two further berths if required with plenty of storage shelving to the port and starboard. Large windows surrounding the saloon area create a bright and airy atmosphere with curtains if needed.

L Shaped galley positioned to the starboard side comprising of Plastimo 2 burner gas oven with grill, single unit fridge and fridge-freezer, stainless steel sink and plenty of storage and worktop space.

Large aft cabin offering a spacious double berth with hanging locker

The heads offers a wash basin vanity with hot and cold water. Marine toilet with macerator pump out or alternative deck pump out so that the holding tank can be bypassed if needed. The shower is thermostatically controlled with pump out for the shower tray.

Construction

Hunter Channel 27 built by Hunter Boats Limited (UK) and designed by David Thomas.

GRP hull, deck and superstructure (white)

Bilge keel

Stainless steel pulpit

Stainless steel stanchions and guard wire

Tiller steering

Disclaimer

For a full, detailed specification with additional photographs and direct contact details for the listing office visit our website

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Unless otherwise stated on the specification sheet the following presumptions are made
- Sail drive and shaft seals are more than 5 years of age
- Fuel and gas hoses and regulators are over 5 years old
- Standing rigging and sails are more than 10 years old

Please note that as the broker/agent, we cannot guarantee or warrant the serviceability of any safety equipment included within the inventory, including but not limited to the condition, operation, or service dates of such equipment. It is the responsibility of the buyer to thoroughly inspect and assess the condition of all safety equipment prior to purchase.


NOTE - Please ring our offices prior to visiting, as the boat may be unavailable for viewing or located at a different marina.

Contact

boatpoint at Conwy Marina

conwy@boatpoint.co.uk

01492 580 001

Recommended Boats

Boatpoint

boatpoint at Conwy Marina

conwy@boatpoint.co.uk

01492 580 001

Hunter Channel 27 - 1999£23,500

Located at Conwy Marina

Summary

Hunter Channel 27 notorious for their high quality build, excellent accommodation layout and ease of handling through self tacking jib and all lines leading back to the cockpit. Bilge keel this boat is perfect for exploring the local coastal waters, coves and bays and can take to the ground if needed only drawing 1m. Meticulously cared for this two owner boat is well equipped and will make a great cruiser for the start of the season. Antifouled 2024 and engine serviced 2024.

Details:

Engine: Yanmar 1GM

Horsepower: 10

Fuel Type: Diesel

Beam: 2.8m

Draft: 1m

Keel: Bilge Keel

Hull Construction: Fibreglass (GRP)

Drive Type: Shaft

Displacement: 2590kg

Fuel Tank Cap: 25l

Water Tank Cap: 100 Litresl

LOA: 7.8m

Builder: Hunter Boats Limited

Hull Type: Monohull

Mechanical

Yanmar 1GM 10HP engine

Diesel inboard

Shaft driven

Martec freshwater cooling system

Single cylinder

2 Blade prop with Stripper rope cutter

Recent Maintenance:

Engine serviced - 2024

New stern gland - Oct 2024

New cutlass bearing - Oct 2024

Antifouled and anodes replaced - 2024

Electrical

2X batteries (1X engine/ 1X domestic)

240V Shore power with galvanic isolator

Battery charger

Rutland wind generator

Hot water system heated by 240V power supply or by the engine cooling system

Mikuni thermostatic forced air diesel heating (vents in main cabin, aft cabin and heads)

Thermostatic 240V convertor heater in main cabin

240v convector heater in aft cabin

Rigging

Fractional stainless steel rigging

Alloy Z spar

Slab mainsail reefing (2001) with easy jacks and cover

Jib furling (2001)

2X Lewmar winches

High grade spinlock jammers on all lines

Sail Wardrobe:

Main sail

Furling head sail

Scooper

Navigation

Navigational lights

Suunto compass

NASA Clipper speed/log +depth duo

Garmin GPS

NASA Wind

ICOM VHF radio

Autohelm tiller pilot

NASA Navtex pro

Radar reflector

Interfaced autohelm and GPS

Deck

Fenders and warps

Plough anchor with chain and warp

Stainless steel boarding ladder

Stainless steel guard wire

Auxiliary engine bracket (wooden)

Cockpit shower (Hot and cold)

Safety

Life raft - Expires 2026

Canvas

Spray hood (Blue)

Miscellaneous

Quicksilver dinghy

Accommodation

The Hunter Channel 27 offers six berths across two cabins with 2X doubles and 2X singles.

Forward open V berth

Good sized saloon with U Shaped seating (blue upholstery scheme) surrounding a double leaved teak cockpit table. The saloon area can also provide two further berths if required with plenty of storage shelving to the port and starboard. Large windows surrounding the saloon area create a bright and airy atmosphere with curtains if needed.

L Shaped galley positioned to the starboard side comprising of Plastimo 2 burner gas oven with grill, single unit fridge and fridge-freezer, stainless steel sink and plenty of storage and worktop space.

Large aft cabin offering a spacious double berth with hanging locker

The heads offers a wash basin vanity with hot and cold water. Marine toilet with macerator pump out or alternative deck pump out so that the holding tank can be bypassed if needed. The shower is thermostatically controlled with pump out for the shower tray.

Construction

Hunter Channel 27 built by Hunter Boats Limited (UK) and designed by David Thomas.

GRP hull, deck and superstructure (white)

Bilge keel

Stainless steel pulpit

Stainless steel stanchions and guard wire

Tiller steering

Disclaimer

For a full, detailed specification with additional photographs and direct contact details for the listing office visit our website

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Unless otherwise stated on the specification sheet the following presumptions are made
- Sail drive and shaft seals are more than 5 years of age
- Fuel and gas hoses and regulators are over 5 years old
- Standing rigging and sails are more than 10 years old

Please note that as the broker/agent, we cannot guarantee or warrant the serviceability of any safety equipment included within the inventory, including but not limited to the condition, operation, or service dates of such equipment. It is the responsibility of the buyer to thoroughly inspect and assess the condition of all safety equipment prior to purchase.


NOTE - Please ring our offices prior to visiting, as the boat may be unavailable for viewing or located at a different marina.

Additional Images